HVAC Coil & Sheet Metal
Aluminum Sheets
Specifications:
- ASTM B209 Standard Specification of Aluminum Alloy, Sheet, and Plate
- References ANSI Standard H-35.2 Dimensional Tolerances for Aluminum
Mill Products
Sizes:
- 032–.125 (48 x 120 sheet)
- 032–.040 (48 x 96 sheet)
- 032 = 22 GA
- 040 = 20 GA
- 050 = 18 GA
- 063 = 16 GA
- 125 = 11 GA
Aluminum Coil
Specifications:
- ASTM B209 Standard Specification of Aluminum Alloy, Sheet, and Plate
- References ANSI Standard H-35.2 Dimensional Tolerances for Aluminum Mill Products
Sizes
- .032–.063 48" coil
Copper Cold Roll Sheet and Coil
- Copper is unsurpassed for its beauty and performance in a variety of applications to architects and builders.
- Ideal for: roofing, flashing, coping covers, fascia and gravel stops, cornices and mansard slopes, gutters, water stops, and expansion joints
Sizes
- 12 oz(3 x 10 and 3 x 8)
Galvanized Coil 36", 48", 60"
G60 and G90 galvanized are domestically produced and meet the following ASTM specifications:
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) commercial quality carbon steel sheets (14–10 ga) Previously ASTM A-526
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) lockforming quality carbon steel sheets(30–16 ga) Previously ASTM A-527
Sizes
- 26–16 ga, 60" 10,000# coils
- 26 and 24 ga, G60 60" 10,000# coils
- 28 and 26 ga, G40 36" 10,000# coils
- 26–22 ga, G60 48" 10,000# coils
- 26–14 ga, G90 48" 10,000# coils
Galvanized Sheets
G60 and G90 galvanized are domestically produced and meet the following ASTM specifications:
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) commercial quality carbon steel sheets (14–10 ga) Previously ASTM A-526
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) lockforming quality carbon steel sheets (30–16 ga) Previously ASTM A-527
- All sheets come in standard sizes and can be cut to length
Thickness
- G40 coating: 28–24 ga
- G60 coating: 26–22 ga
- G90 coating: 26–16 ga
Galvanized Slit Coil for Spiral Duct
- Galvanized 5.394" slit coil used to manufacture spiral duct are available in several gauges and coating weights
- Gauges offered range from 28 through 20 ga with desired and appropriate galvanized coating and max coil weights
- Stocked material will vary by NB Handy location
- Material not stocked and other slit coil sizes are available by request
Galvanneal
Galvannealed steel requested as a paint sheet is produced with an A-60 coating which meets ASTM A653/653m specs. This 100% iron-zinc alloy coating can easily be painted after normal cleaning.
Sizes
- Coil
- 24 and 22 ga, 10,000# coils
- 24 and 22 ga, 20–25,000# coils
- Sheet
- 24 and 22 ga, 48 x 120
- 24 ga, 48 x 96
Lead Sheet and Roll
- Ideal for building, industrial, waterproofing, and shielding requirements
- The standard sheet lead is rolled from 99.5% pure lead or better
- Rolls are from 6" to 8' widths and up to 25' lengths
- Other sizes and cuts are available on request
GALVALUME®
- Unpainted GALVALUME® sheet is most often specified for low-slope roofing applications where functional performance is the primary consideration and cosmetic appearance is secondary.
- GALVALUME sheet has clearly demonstrated its outstanding performance in these applications for over 20 years
- Specifications: ASTM A792-02
- GALVALUME Plus is a bare, GALVALUME sheet product with a thin, clear acrylic coating and offers several advantages:
- Can be roll formed dry, with no vanishing oil applied in our coating line or at the roll forming line (GALVALUME Plus should only be roll formed dry)
- Panels will be delivered to the jobsite dry, with no vanishing oil on the surface
- Resists fingerprinting and smudging during handling and installations at the jobsite
- Provides excellent resistance to storage stain and transit corrosion
- Provides a bright appearance which weathers uniformly
Sizes
- 24 ga, 10,000# max coil
- 24 ga, 48 x 120 sheet
Stainless Steel Sheets
- All Type 304-2B stainless meets the following specification: ASTM A240/240M covering austenitic alloy sheets
- Type 304 (18-8 Low Carbon) is especially recommended for welding construction where severe corrosive conditions are encountered, such as in the dairy, chemical, paper, and textile industries
- This low carbon grade is not ordinarily required for welded construction subjected only to atmospheric conditions
Sizes
- 26–16 ga, 48 x 120 sheet
- 26 and 24 ga, 48 x 96 sheet