HVAC - Sealants and Adhesives

Sealants and Adhesives

Design Polymerics

Water-based Adhesive: DP 2501

Water-based Adhesive: DP 2501

  • Water-based, premium, UL classified duct liner adhesive, specifically formulated for roller and low pressure spray and coil line applications
  • Available in black or white

Water-based Adhesive: DP 2502

  • Water-based, premium, UL classified duct liner adhesive, higher viscosity version of DP 2501
  • Specifically formulated for roller, brush and spray applications
  • Available in black or white

Water-based Adhesive: DP 3050

  • Water-based lagging adhesive, premium, UL classified
  • Vapor barrier for duct wrap, insulation "duct butter"
  • Available in white
Water-based Sealer: DP 1015

Water-based Sealer: DP 1015

  • Smooth, water-based, UL listed, high velocity duct sealant for commercial and residential use
  • Available in gray
Water-based Sealer: DP 1010

Water-based Sealer: DP 1010

  • Smooth, water-based, premium, UL listed, high velocity duct sealant for commercial and residential use
  • Available in gray Water-based Sealer: DP 1020
  • Fiber reinforced, water-based, premium, UL listed, high velocity duct sealant for commercial and residential use

Water-based Sealer: DP 1030

  • Fiber reinforced, water-based, UL listed, high velocity duct sealant for commercial and residential use
  • Available in white or gray

Canisters and Aerosols

DP 2590
  • A premium, solvent-based, fast drying, nonflammable, pressure sensitive fiberglass insulation adhesive
  • Supplied in a convenient spray system which is portable and cost effective
DP 2595
  • A premium, solvent-based, fast drying, nonflammable, pressure sensitive closed cell foam insulation adhesive
  • Supplied in a convenient spray system which is both portable and cost effective
DP 77
  • Industrial strength aerosol spray adhesive
DP 88
  • Aerosol insulation repair, edge coating, "duct butter"
DP 99
  • Aerosol degalvanizing spray
DP 1090 Solvent Sealer

DP 1090 Solvent Sealer

  • A smooth, solvent-based, premium, UL classified, high velocity duct sealant for commercial use
  • Available in tan

Duro Dyne

Water-based Sealant: WIT

Water-based Sealant: WIT

  • Suggested for bonding insulation material to sheet metal
  • Water-based, good wet tack, nonflammable when wet
  • Viscosity of 1600-1800 CPS; typical at 1800 – Brookfield LVF #4 Spindle, 6 RPM at 25°C
  • Effect of freezing: no damage – one cycle
  • Storage life of six months at 70°F
  • Designed for use with spray equipment or Duro Dyne Roto Bonder
Water-based Sealant: SSG

Water-based Sealant: SSG

  • Suggested for bonding insulation material to metal
  • Water-based, nonflammable when wet, designed for spray use
  • Contains no solvents, yet tacks fast
  • Viscosity of 1400 CPS #7 – Brookfield LVF at 6 RPM 25°C
  • Keep from freezing
  • Storage life of six months at 70°F
  • Designed for use with spray equipment only; suggested use with Duro Dyne's Super Spray Fast Application system

Ductmate

PROseal

PROseal

  • A premium high velocity, water-based sealant PROseal Spray
  • A sprayable premium high velocity, waterbased duct sealant that can be applied using a wide range of sealant application equipment
FIBERseal

FIBERseal

  • A premium high velocity, water-based sealant with fiber reinforcement EZ-seal
  • An industrial grade water-based duct sealant with fiber reinforcement
SOLVseal

SOLVseal

  • A premium high velocity, solvent-based duct sealant with a blend of unique synthetic elastomers, select hydrocarbon resins, and minerals
5511M

5511M

  • A pumpable mastic/sealant specifically formulated for application to duct joints at the roll-forming line
Lag-It

Lag-It

  • A water-based adhesive for sealing the edges and tears in duct insulation
Super Liner Seal (SLS)

Super Liner Seal (SLS)

  • A water-based coating to seal the surface of duct insulation
EverSeal

EverSeal

  • A commercial or residential grade waterbased, smooth duct sealant

Polymer Airseal

Polymer Airseal 22

Polymer Airseal 22

  • Smooth water-based duct sealant
  • Low VOC, LEED Compliant
Polymer Airseal 33

Polymer Airseal 33

  • Premium fiber reinforced water-based duct sealant
  • Low VOC, LEED Compliant
Polymer CADS

Polymer CADS

  • Fiber reinforced water-based duct sealant
  • Low VOC, LEED Compliant
Polymer Airseal Zero

Polymer Airseal Zero

  • Solvent-based duct sealant
  • Zero VOC, LEED Compliant
Polymer Glasstack 25

Polymer Glasstack 25

  • Water-based insulation adhesive
  • Low VOC, LEED Compliant
Polymer Glasstack 35

Polymer Glasstack 35

  • Fast tacking water-based insulation adhesive
  • Low VOC, LEED Compliant

United McGill

Water-based Sealant: Uni-Flex

Water-based Sealant: Uni-Flex

  • Cures to a durable, flexible film that can withstand handling and mechanical vibrations
  • Formulated for use on low-, medium-, and high-pressure duct systems
  • Antimicrobial agents remain active after it has cured
  • Available in 10.5-ounce cartridges, 1-, 2-, and 5-gallon pails, and 52-gallon drums
Uni-Mastic 181 Duct Sealer

Uni-Mastic 181 Duct Sealer

  • A water-based product for sealing joints in all types of HVAC duct systems
  • Provides excellent adhesion to metal duct, fiberglass ductboard, and flexible duct
  • Dries quickly and remains flexible after it has cured
  • Fiber reinforced sealer is ideal for retrofit applications and new construction
  • Nonflammable, produces no harmful fumes, and can be used on indoor and outdoor duct systems
  • Antimicrobial agents remain active after it has cured
  • Available in 10.5- and 29-ounce cartridges, 1-, 2-, and 5-gallon pails and 52-gallon drums
Water-based United Duct Sealer

Water-based United Duct Sealer

  • Specially formulated for sealing low-, medium-, and high-pressure duct systems
  • Recommended for indoor and outdoor application
  • Provides excellent adhesion to galvanized metal and cures to a tough, flexible film
  • Contains no solvents or asbestos and has no harmful fumes
  • Nonflammable (wet or dry) and fire retardant
  • Available in 10.5-, and 29-ounce cartridges, 1- and 5-gallon pails, and 52-gallon drums
Uni-Weather Duct Sealer

Uni-Weather Duct Sealer

  • A medium-viscosity sealant for indoor/outdoor application on duct systems
  • Specially formulated to resist weathering and aging, even when exposed to ultraviolet light
  • Available in 10.5-ounce cartridges, 1-gallon cans, 5-gallon pails, and 52-gallon drums
United Duct Sealer

United Duct Sealer

  • Features a high bonding strength for sure, firsttime sealing of joints in low-, medium-, and high-pressure HVAC metal duct systems
  • Suitable for indoor and outdoor applications
  • Has a high solids content and has slower evaporation than standard sealants
  • Available in 10.5-, and 29-ounce cartridges, 1-gallon cans, 5-gallon pails, and 52-gallon drums
Uni-Spray

Uni-Spray

  • Provides a high-strength bond between metal and fiberglass duct liner
  • Ideal for rectangular fitting construction, quick repair jobs, and a variety of special applications
  • Available in 20-ounce aerosol cans, 11-, 38-, 187-, and 375-pound canisters in both clear and green colored adhesive, eliminating the need for expensive spray/pump equipment

Slocum Adhesives

#177 Nonflammable Solvent

  • Intended for use as a cleaner/thinner
  • Primarily used for cleaning spray equipment and over spray areas associated with adhesives used in bonding fiberglass insulation to sheet metal in air conditioning duct systems

#811 Flammable Solvent

  • Intended for use as a cleaner/thinner
  • Primarily used for cleaning spray equipment and over spray areas associated with adhesives used in bonding fiberglass insulation to sheet metal in air conditioning duct systems

#134 Flammable Spray Adhesive

  • Flammable, fast drying, quick-setting, low pressure, spray adhesive designed to produce a strong permanent bond when used with a variety of insulation materials
  • Primarily used in bonding fiberglass insulation to sheet metal
  • Should only be applied to clean, dry surfaces
  • Best bonds are obtained if substrates are maintained at temperatures above 40°F
  • Drying time and coverage per gallon will vary according to the rate of adhesive application and local atmospheric conditions

#132 Fast-drying Insulation Adhesive

  • Fast-drying insulation adhesive is designed to produce a strong permanent bond when used with a variety of insulation materials
  • Apply with a brush or roller to achieve the desired coverage
  • Primarily used in bonding fiberglass insulation to sheet metal in air conditioning duct systems
  • Best bonds are obtained if substrates are maintained at temperatures above 40°F

#137 Nonflammable, Low Pressure Spray Adhesive

  • Nonflammable, fast drying, quick setting, low pressure sprayable adhesive designed to produce a strong permanent bond when used with a variety of insulation materials
  • Primarily used in bonding fiberglass insulation to sheet metal
  • Best bonds are obtained if substrates are maintained at temperatures above 40°F