N.B. Handy Co

• 18 ga mild steel — 20 ga stainless
• 5 AMP, 120 volt
• 2500 RPM
• 14 / 4 lbs.

Duro Stapler and Staples

• Duro Dyne's Flexible Connectors are preassembled metal-to-fabric which eliminates this difficult, time-consuming shop operation
• After forming the metal, the overlap can be riveted, screwed, or spot welded
• Fabric seam is quickly closed using the handy

Duro Stapler

• The result is a sturdy, low cost flexible connector which meets engineering specifications

• Zinc plated steel construction
• Straight or offset handles
• 9.5" overall length
• 3" lip length
• 1-1/8" throat depth
• Bending depth marks
• Available with cushion grip handles

Starter Kits

Wood Cutting Blades

• For wood with nails, metal pipe, angels, and a variety of specialty applications from drywall to drain pipe
• Shatterproof blades formulated from a premium metal composition consisting of a high speed steel cutting edge micro welded to a flexible high carbon steel back

Drill Bits

• 135° split point, high speed steel, black oxide
• Black oxide finish for added lubricity
• Short length and heavy-duty construction provides additional strength
• Unique flute design for superior material removal

SDS-Plus S4 Rotary Hammer Bits

• Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal
• Carbide-tipped drill bit heads are harder, tougher, and more resistant to extreme loads

COX Caulking Guns

• Wear compensating device
• Professional, industrial and high volume usage
• Die cast zinc alloy body
• Built-in ladder hook
• Patented catch plate (sintered steel)
• Barrel turns facilitate application around corners
• Thumb-activated pressure release

Murphy "Stay Sharp" Knives

• Developed for artisans who cut, trim or split leather, rubber, and plastics
• All blades are made from 17 ga chrome vanadium

Open-end Pop Rivets

• Wide range of diameters
• Range of lengths suitable for material thicknesses up to 26mm
• Countersunk (120°) heads available
• Break head mandrels available in most sizes
• Large-flange rivets, giving wide load spread, available in aluminum alloy and nickel-copper
• Nickel-copper rivets particularly suitable for marine and other corrosive atmospheres

Riveters

• Ideal for sheet metal and similar applications where power is not available
• Sets rivets from 3/32" through 5/32" diameters
• Furnished with standard nosepiece to set 1/8" rivets

PowerLink 30 Hand Riveter

• Innovative latch design keeps handles closed without cumbersome chains or wires
• Designed to minimize friction and improve performance and longevity
• Jam-free front-end design
• Shorter nose housing for the back pocket
• Grips cover the length of the lever and body
• Innovative soft handles are contoured to fit the hand
• Recessed rib designs eliminate pinch points
• Wrench and nosepieces are out of the way to improve access and prevent torn pockets.

Tinner's Steel Circumference Rules

• Tempered medium-weight steel
• Hole in one end for hanging
• Deeply etched, permanent markings are black-filled for easy reading
• Special graduations on 95-3' model:
• One side, upper edge, marked consecutive inches to 1/16ths
• Lower edge, marked up to 150 circumference inches to 1/8ths
• Reverse side of both models has formulas for calculating circumference diameter, area, and size tables for laying out measures and cans

Red End Two-Way Rule

• For measuring left to right and right to left
• Flat, inside marking lie close to the work
• Marked both sides, both edges in feet, inches, and 1/16ths

Red End Extension Rule

• 6', spring joint, natural color, wood rule with graduated slide that extends up to a full 6"
• Slide runs under friction in a T-slot and has a stop at each end so slide will not fall out
• Marked both sides and both edges to 1/16ths of an inch, 16" stud centers in red, regular outside markings
• No matter how the rule is unfolded, an extension is ready for use on the section
• X46F has flat inside markings, numbering begins on the inside of the rule
• HX46 has hook; zero falls at the inside of the hook, for distance measuring Rules

Red End Rule

• White rule marked both sides, both edges to 1/16ths; 16" stud centers in red
• Regular outside reading 066F and 068F has inside of rule; measurement is close to work

Bit-Tip Screws

• Select the Bit-Tip that's right for the job; point length will determine metal thickness that can be drilled, tapped and fastened
• Plywood, soft wood, composition board, drywall, insulation and laminates may be fastened to metal framing or components
• Versatile Bit-Tip screw is an excellent replacement for fastening operations now using rivets, nuts and bolts, spot welds, or adhesives

Zinc Hex TEK Screws

• TEK screws are self drilling and self tapping
• No need for a pilot hole

Drill Screws

• Slotted-hex, washer-head
• Hardened and zinc plated
• Sharp corners
• Head size: ¼