Roofing Metals
Sentriclad
Sentriclad finish is a premium coil coating that is baked on and specifically designed to meet the functional and aesthetic requirements of many architectural, industrial and commercial construction applications.
- Sentriclad finish coating is a 70% Kynar 500® / Hylar 5000® paint finish that is applied to Galvalume (AZ50) steel and 3000 series aluminum on a continuous, reverse roll-coat paint
- Primary gauges include 24ga Galvalume and .032", .040", .050" and.063" aluminum
- Sentriclad's clean metal lines accent architectural detail from contemporary to classic to rustic
- The Sentriclad finish carries a 30-year limited warranty
GALVALUME Sheet & Coil
- Unpainted GALVALUME sheet is often specified for low slope roofing applications where functional performance is the primary consideration and cosmetic appearance is secondary
- GALVALUME sheet has clearly demonstrated its outstanding performance on these applications for over 20 years
- GALVALUME Plus is a bare, GALVALUME sheet product with a thin, clear acrylic coating.
- Specifications: ASTM A792-02
- Resists fingerprints and smudging during handling and installations at the jobsite
- Provides excellent resistance to storage stain and transit corrosion
GALVANNEAL Sheet & Coil
- Galvannealed steel requested as a paint sheet produced with an A-60 coating
- Coating meets ASTM-924, and the galvanized material itself is an ASTM- 653 covering lockforming quality.
- 100% iron-zinc alloy coating can easily be painted after normal cleaning. Galvanized Sheet & Coil
- G60 and G90 galvanized are domestically produced and meet the following ASTM specifications: ASTM A-924, ASTM A-653, and ASTM A-653
Aluminum Sheet & Coil
- 48" wide
- ASTM B209 Standard Specification of Aluminum Alloy, Sheet & Plate
- References ANSI Standard H-35.2 Dimensional Tolerances for Aluminum Mill Products
Stainless Sheet
- 48" wide
- Type 304-2B stainless meets the following specification: ASTM A240/240M covering austenitic alloy sheets
- Type 304 (18-8 Low Carbon) recommended for welding construction where severe corrosive conditions are encountered
Copper Cold Roll Sheet & Coil
- Used in general building applications such as standing seams, batten seams, flat seam roofs, flashings, soffits, fascias, mansards, copings, skylights, wall panels, bay windows, awnings, downspouts, and gutters
Follansbee TCS
- TCS II is a type 304 (non-magnetic) dead soft stainless steel covered on both sides with the new ZT alloy (50% tin/50% zinc)to a thickness of 20 microns
- The chromium-nickel content and the annealed properties make TCS II one of the most versatile and one of the most corrosion resistant roofing and flashing materials available today
Follansbee Terne II
- Follansbee Terne II is a prime base sheet of drawing-quality carbon steel, coated both sides with ZT alloy (50% tin/50% zinc)
Galvanized Coil and Sheet
Galvanized Coil 36", 48", 60"
G60 and G90 galvanized are domestically produced and meet the following ASTM specifications:
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) commercial quality carbon steel sheets (14–10 ga) Previously ASTM A-526
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) lockforming quality carbon steel sheets(30–16 ga) Previously ASTM A-527
Sizes
- 26–16 ga, 60" 10,000# coils
- 26 and 24 ga, G60 60" 10,000# coils
- 28 and 26 ga, G40 36" 10,000# coils
- 26–22 ga, G60 48" 10,000# coils
- 26–14 ga, G90 48" 10,000# coils
Galvanized Sheets
G60 and G90 galvanized are domestically produced and meet the following ASTM specifications:
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) commercial quality carbon steel sheets (14–10 ga) Previously ASTM A-526
- ASTM A-653 – General requirements for delivery of zinc coated (galvanized) lockforming quality carbon steel sheets (30–16 ga) Previously ASTM A-527
- All sheets come in standard sizes and can be cut to length
Thickness
- G40 coating: 28–24 ga
- G60 coating: 26–22 ga
- G90 coating: 26–16 ga