Description

The Pittsburgh Lock revolutionized the HVAC Industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. The Model 20 and Model 20 SuperSpeed Pittsburgh rollforming machines have 5 forming stations with 2 forming positions. One inboard forming position forms the Pittsburgh lock and one auxiliary or outboard forming position has the capability of forming 1 of 3 different profiles.  Forming speeds are listed in the chart above. Standard with Lockformer® quality construction, these machines have motors; high precision needle-type bearings; heavy ¾” chassis plate; case hardened and ground roll shafts; and arc welded steel stands protected with Lockformer’s top-quality primer and paint finish.  Alemite grease fittings are easily accessible from a central lubrication panel.  

Model	Model 20 Super Speed	Model 20
Capacity	20 - 26 gauge	20 - 26 gauge
Depth of Pocket	5/16"	5/16"
Hammer Over-edge Adjustability	3/8"	3/8"
Forming Speed	75 FPM	25 FPM
Drive	Matched Double V-Belt	V-Belt
Motor	2 HP, 1800 RPM Other 3 HP motors available	3/4 HP 1800 RPM
Voltages	230V/460V	115V/230V
Amps	6/3	10/5
Phases	3	1
Dimensions	48"L x 24"W x 42"H	36"L 16.5"W x 41"H
Weight	450 lbs	450 lbs

An optional Auto-Guide Power Flanger attachment is available for the Model 20 and Model 20 Super Speed Gauge Pittsburgh machines. The flanging attachment follows any edge straight or irregular while forming a 7/32 (outside) flange height.  Just turn up a starting flange in the table slot, feed materials into the rolls and let go.  Handles radii down to 3-1/4” or 1-3/8” manually at speeds of 16-18 fpm.

Auto-Guide Power Flanging Attachment For Pittsburgh Lock Models 20 & 24

Auto-Guide will automatically follow any edge – straight, inner, or outer radii – and no change over is necessary between Pittsburgh Lock and flanging operations.

• Automatically handles radii down to 3-1/4”.
• Lock out the automatic feature to run a radius down to 1-3/8”.

Two Auto-Guide Power Flanging Attachment model are available:

• one for Model 24
• one for Model 20

Rolls	Double Seam Rolls	Drive Cleat Rolls	Right Angle Flange Rolls
Capacity	20 - 26 gauge	20 - 26 gauge	20 - 26 gauge
Approximate Material Used	1"	2-1/8"	Up to 3/8"
Size	3/8" Seam	1-1/8" Width	Up to 3/8" Height